HONDA Silver Wing 400 | TRIUMPH Scrambler 1200 XE |
---|
engine specs | |
Type | |
---|---|
Liquid-cooled 4-stroke 8-valve DOHC parallel twin | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
Displacement | |
398 cm3 | 1200 cm3 |
Bore X Stroke | |
2.5x2.4 in OR 64 mm | 3.8x3.1 in OR 97 mm |
Compression Ratio | |
10.8:1 | 11:1 |
Horsepower | |
38/8000 KW(hp)/RPM | 90/7000 KW(hp)/RPM |
Torque | |
27/6500 lb-ft/RPM OR 37/6500 Nm/RPM | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
Fuel System | |
PGM-FI | Ride by wire, multipoint sequential electronic fuel injection |
transmission specs | |
Gearbox | |
---|---|
Automatic | 6-speed |
Clutch | |
Automatic centrifugal | Wet, multi-plate assist clutch |
Final Drive | |
V-belt | X-ring chain |
chassis specs | |
Frame | |
---|---|
Centre backbone steel tube | Tubular steel, with steel cradles |
Front Suspension | |
41mm telescopic fork, 120mm axle travel | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
Rear Suspension | |
Dual conventional dampers with 5-step spring preload adjustment, 115mm axle travel | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
Front Brake | |
256x5mm single disc with Combined 3-piston calliper and sintered metal pads | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
Rear Brake | |
240x6.5mm hydraulic disc with dual-piston calliper sintered metal pads | Single 255 mm disc, single piston floating Nissin caliper, ABS |
dimension specs | |
Overall Length | |
---|---|
89.6 in OR 2276 mm | 91.7 in OR 2329 mm |
Overall Width | |
30.3 in OR 770 mm | 35.6 in OR 904 mm |
Seat Height | |
29.1 in OR 739 mm | 34.3 in OR 871 mm |
Ground Clearance | |
5.5 in OR 140 mm | - |
Weight | |
503 lbs OR 228 kg | 507 lbs OR 230 kg |
Fuel Capacity | |
4.2 gallons OR 15.9 L | 4 gallons OR 15.1 L |
Wheelbase | |
62.8 in OR 1595 mm | 61.8 in OR 1570 mm |
tyres specs | |
Front | |
---|---|
120/80-14M | 90/90-21 |
Rear | |
150/70-13M | 150/70 R17 |