SUZUKI DR-Z250 | TRIUMPH Scrambler 1200 XE |
---|
engine specs | |
Type | |
---|---|
4-stroke, air/oil-cooled, single-cylinder, DOHC 4-valve | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
Displacement | |
249 cm3 | 1200 cm3 |
Bore X Stroke | |
2.9x0 in OR 74 mm | 3.8x3.1 in OR 97 mm |
Compression Ratio | |
10.4:1 | 11:1 |
Horsepower | |
- | 90/7000 KW(hp)/RPM |
Torque | |
- | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
Fuel System | |
Mikuni TM28SS Carburetor | Ride by wire, multipoint sequential electronic fuel injection |
transmission specs | |
Gearbox | |
---|---|
6-speed, manual | 6-speed |
Clutch | |
Wet, multi-plate, manual | Wet, multi-plate assist clutch |
Final Drive | |
Chain | X-ring chain |
chassis specs | |
Frame | |
---|---|
Steel | Tubular steel, with steel cradles |
Front Suspension | |
Telescopic, oil-damped, 12-way adjustable compression and 17-way rebound damping | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
Rear Suspension | |
Link-type, gas/oil-damped, fully-adjustable compression/rebound damping and preload | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
Front Brake | |
Single hydraulic disc | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
Rear Brake | |
Single hydraulic disc | Single 255 mm disc, single piston floating Nissin caliper, ABS |
dimension specs | |
Overall Length | |
---|---|
84.6 in OR 2149 mm | 91.7 in OR 2329 mm |
Overall Width | |
34.6 in OR 879 mm | 35.6 in OR 904 mm |
Seat Height | |
35 in OR 889 mm | 34.3 in OR 871 mm |
Weelbase | |
57.3 in OR 1455 mm | - |
Ground Clearance | |
11.8 in OR 300 mm | - |
Weight | |
253 lbs OR 115 kg | 507 lbs OR 230 kg |
Fuel Capacity | |
2.8 gallons OR 10.6 L | 4 gallons OR 15.1 L |
Wheelbase | |
57.3 in OR 1455 mm | 61.8 in OR 1570 mm |
tyres specs | |
Front | |
---|---|
80/100-21 | 90/90-21 |
Rear | |
100/100-18 | 150/70 R17 |