SHERCO 4.5i ENDURO | TRIUMPH Scrambler 1200 XE |
---|
engine specs | |
Type | |
---|---|
Single cylinder, four stroke, liquid-cooled | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
Displacement | |
448.6 cm3 | 1200 cm3 |
Bore X Stroke | |
3.7x2.5 in OR 94 mm | 3.8x3.1 in OR 97 mm |
Compression Ratio | |
12.0:1 | 11:1 |
Horsepower | |
- | 90/7000 KW(hp)/RPM |
Torque | |
- | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
Fuel System | |
Electronic fuel injection/digital engine management | Ride by wire, multipoint sequential electronic fuel injection |
transmission specs | |
Gearbox | |
---|---|
6-Speed | 6-speed |
Clutch | |
Wet multi-disc | Wet, multi-plate assist clutch |
Final Drive | |
Chain | X-ring chain |
chassis specs | |
Frame | |
---|---|
hrome-Molybdenum forming a single structure | Tubular steel, with steel cradles |
Front Suspension | |
46 mm Paioli/Kayaba telescopic fork. Forward offset wheel axle and brake calliper. | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
Rear Suspension | |
Progressive system with single Paioli absorber with aluminium structure and fully adjustable (four regulation types), linked to the centre of the chassis and pushed by the swing arm through an articulated rod system | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
Front Brake | |
Single disc 270mm | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
Rear Brake | |
Single disc 240mm | Single 255 mm disc, single piston floating Nissin caliper, ABS |
dimension specs | |
Overall Length | |
---|---|
- | 91.7 in OR 2329 mm |
Overall Width | |
- | 35.6 in OR 904 mm |
Seat Height | |
34.8 in OR 884 mm | 34.3 in OR 871 mm |
Weight | |
254 lbs OR 115 kg | 507 lbs OR 230 kg |
Fuel Capacity | |
2.2 gallons OR 8.3 L | 4 gallons OR 15.1 L |
Wheelbase | |
58.5 in OR 1486 mm | 61.8 in OR 1570 mm |
tyres specs | |
Front | |
---|---|
90/90 -21 | 90/90-21 |
Rear | |
120/90 -18 | 150/70 R17 |