KAWASAKI Mule 4010 Trans4X4 | HARLEY-DAVIDSON CVO Street Glide |
---|
engine specs | |
Type | |
---|---|
Four-stroke, liquid-cooled, overhead valve V-twin | Milwaukee-Eight VVT 121 |
Displacement | |
617 cm3 | 1977 cm3 |
Bore X Stroke | |
3.0x2.7 in OR 76 mm | 4.1x4.6 in OR 104 mm |
Compression Ratio | |
10.3:1 | 11.4:1 |
Horsepower | |
- | 115/4500 KW(hp)/RPM |
Torque | |
- | 139/3000 lb-ft/RPM OR 188/3000 Nm/RPM |
Fuel System | |
EFI | Electronic Sequential Port Fuel Injection (ESPFI) |
transmission specs | |
Gearbox | |
---|---|
Automatic, L, H, reverse | 6-Speed Cruise Drive |
Clutch | |
Automatic | Mechanically actuated 10 plate, wet Assist & Slip |
Primary Drive | |
- | Chain |
Final Drive | |
Shaft, 4WD | Belt |
chassis specs | |
Frame | |
---|---|
Steel | Mild steel: tubular frame, two-piece stamped and welded backbone cast and forged junctions twin down tubes bolt-on rear frame with forged fender supports MIG welded |
Front Suspension | |
Independent, MacPherson strut / 3.9 in. | 47 mm Inverted 1x1 Front Forks |
Rear Suspension | |
Semi-independent, DeDion axle with leaf springs and shocks / 2.8 in. | Dual adjustable emulsions suspension with remote preload adjustment on the left shock, and threaded preload on the right shock |
Front Brake | |
Four-wheel hydraulic drums, sealed | Double discs 320 mm |
Rear Brake | |
Four-wheel hydraulic drums, sealed | Single disc 300 mm |
dimension specs | |
Overall Length | |
---|---|
130.1 in OR 3305 mm | 94.9 in OR 2410 mm |
Overall Width | |
58.5 in OR 1486 mm | 38.4 in OR 975 mm |
Seat Height | |
- | 28 in OR 711 mm |
Ground Clearance | |
7.1 in OR 180 mm | 5.5 in OR 140 mm |
Weight | |
1563 lbs OR 709 kg | 838 lbs OR 380 kg |
Fuel Capacity | |
6.2 gallons OR 23.5 L | 6 gallons OR 22.7 L |
Wheelbase | |
85.2 in OR 2164 mm | 64 in OR 1626 mm |
tyres specs | |
Front | |
---|---|
23x11-10 tubeless | 130/60B19 M/C 61H |
Rear | |
23x11-10 tubeless | 180/55B18 M/C 80H |