| HONDA CTX1300 | TRIUMPH Scrambler 1200 XE |
|---|
| engine specs | |
| Type | |
|---|---|
| liquid-cooled 90° V-4, longitudinal crankshaft | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
| Displacement | |
| 1261 cm3 | 1200 cm3 |
| Bore X Stroke | |
| 3.1x2.6 in OR 79 mm | 3.8x3.1 in OR 97 mm |
| Compression Ratio | |
| 10.0:1 | 11:1 |
| Horsepower | |
| - | 90/7000 KW(hp)/RPM |
| Torque | |
| - | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
| Fuel System | |
| PGM-FI with electronic control IACV, four 36mm throttle bodies | Ride by wire, multipoint sequential electronic fuel injection |
| transmission specs | |
| Gearbox | |
|---|---|
| 5 speed, manual | 6-speed |
| Clutch | |
| Wet multi-disc, manual | Wet, multi-plate assist clutch |
| Final Drive | |
| Shaft | X-ring chain |
| chassis specs | |
| Frame | |
|---|---|
| Steel | Tubular steel, with steel cradles |
| Front Suspension | |
| Inverted 45mm fork | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
| Rear Suspension | |
| Twin rear shocks with spring | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
| Front Brake | |
| Dual 310mm front discs | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
| Rear Brake | |
| Single 315mm disc | Single 255 mm disc, single piston floating Nissin caliper, ABS |
| dimension specs | |
| Overall Length | |
|---|---|
| - | 91.7 in OR 2329 mm |
| Overall Width | |
| - | 35.6 in OR 904 mm |
| Seat Height | |
| 29.1 in OR 739 mm | 34.3 in OR 871 mm |
| Weight | |
| 724 lbs OR 328 kg | 507 lbs OR 230 kg |
| Fuel Capacity | |
| 5.1 gallons OR 19.3 L | 4 gallons OR 15.1 L |
| Wheelbase | |
| 64.5 in OR 1638 mm | 61.8 in OR 1570 mm |
| tyres specs | |
| Front | |
|---|---|
| 130/70R-18 | 90/90-21 |
| Rear | |
| 200/50R-17 | 150/70 R17 |
