| HONDA CRF80F | TRIUMPH Scrambler 1200 XE |
|---|
| engine specs | |
| Type | |
|---|---|
| Air-cooled single-cylinder four-stroke, SOHC two-valve SOHC, two-valve | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
| Displacement | |
| 80 cm3 | 1200 cm3 |
| Bore X Stroke | |
| 1.9x1.8 in OR 48 mm | 3.8x3.1 in OR 97 mm |
| Compression Ratio | |
| 9.7:1 | 11:1 |
| Horsepower | |
| - | 90/7000 KW(hp)/RPM |
| Torque | |
| - | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
| Fuel System | |
| 20mm piston-valve carburetor | Ride by wire, multipoint sequential electronic fuel injection |
| transmission specs | |
| Gearbox | |
|---|---|
| 5 Speed, manual | 6-speed |
| Clutch | |
| Wet multi-disc, manual | Wet, multi-plate assist clutch |
| Final Drive | |
| #420 chain 14T/46T | X-ring chain |
| chassis specs | |
| Frame | |
|---|---|
| Lightweight high-tensile steel frame | Tubular steel, with steel cradles |
| Front Suspension | |
| 27.0mm leading-axle Showa fork 5.5-inch travel | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
| Rear Suspension | |
| Pro-Link Showa single shock 4.3 inches travel | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
| Front Brake | |
| Drum | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
| Rear Brake | |
| Drum | Single 255 mm disc, single piston floating Nissin caliper, ABS |
| dimension specs | |
| Overall Length | |
|---|---|
| - | 91.7 in OR 2329 mm |
| Overall Width | |
| - | 35.6 in OR 904 mm |
| Seat Height | |
| 28.9 in OR 734 mm | 34.3 in OR 871 mm |
| Ground Clearance | |
| 8.6 in OR 218 mm | - |
| Weight | |
| 165 lbs OR 75 kg | 507 lbs OR 230 kg |
| Fuel Capacity | |
| 1.3 gallons OR 4.9 L | 4 gallons OR 15.1 L |
| Wheelbase | |
| 47.6 in OR 1209 mm | 61.8 in OR 1570 mm |
| tyres specs | |
| Front | |
|---|---|
| 2.50-16 | 90/90-21 |
| Rear | |
| 3.60-14 | 150/70 R17 |
