| HONDA ANF 125 Innova | BMW R 12 |
|---|
| engine specs | |
| Type | |
|---|---|
| Air-cooled 4-stroke SOHC single | Water-cooled, 2-cylinder, four-stroke boxer engine with four valves per cylinder operated by cam followers and two overhead camshafts per cylinder |
| Displacement | |
| 124.9 cm3 | 1170 cm3 |
| Bore X Stroke | |
| 2.1x2.3 in OR 53 mm | 4.0x2.9 in OR 102 mm |
| Compression Ratio | |
| 9.3:1 | - |
| Horsepower | |
| 8.9/7500 KW(hp)/RPM | 95/6500 KW(hp)/RPM |
| Torque | |
| 7/5000 lb-ft/RPM OR 9/5000 Nm/RPM | 81/6000 lb-ft/RPM OR 110/6000 Nm/RPM |
| Fuel System | |
| 18mm Carburetor | - |
| transmission specs | |
| Gearbox | |
|---|---|
| 4 Speed | 6-speed |
| Clutch | |
| Automatic | - |
| Final Drive | |
| Chain | Shaft |
| chassis specs | |
| Frame | |
|---|---|
| Low-deck mono-backbone rectangular-section steel tube | Tubular space frame in steel, engine self-supporting |
| Front Suspension | |
| 26mm Telescopic fork, 80.5mm axle travel | USD telescopic forks, 45 mm |
| Rear Suspension | |
| Dual damper unit swingarm, 81.6mm axle travel | Aluminium Paralever swinging arm, directly linked WAD spring strut, spring base and rebound damping adjustable |
| Front Brake | |
| 220mm hydraulic disc with dual-piston calliper, drilled rotor and sintered metal pads | Twin disc brake, floating brake discs, 310 mm, 4-piston monobloc fixed calipers |
| Rear Brake | |
| 110mm leading/trailing drum | Single disc brake, 265 mm, 2-piston floating caliper |
| dimension specs | |
| Overall Length | |
|---|---|
| 74.4 in OR 1890 mm | 86.6 in OR 2200 mm |
| Overall Width | |
| 28.6 in OR 726 mm | 32.7 in OR 831 mm |
| Seat Height | |
| 30.2 in OR 767 mm | 29.7 in OR 754 mm |
| Ground Clearance | |
| 5.7 in OR 145 mm | - |
| Weight | |
| 219 lbs OR 99 kg | 500 lbs OR 227 kg |
| Fuel Capacity | |
| 1.9 gallons OR 7.2 L | 3.7 gallons OR 14.0 L |
| Wheelbase | |
| 48.8 in OR 1240 mm | 59.8 in OR 1519 mm |
| tyres specs | |
| Front | |
|---|---|
| 70/100-17 | 100/90-19 |
| Rear | |
| 80/90-17 | 150/80-16 |
