Christini AWD 450E | TRIUMPH Scrambler 1200 XE |
---|
engine specs | |
Type | |
---|---|
Liquid-cooled single cylinder four stroke | Liquid cooled, 8 valve, SOHC, 270° crank angle parallel twin |
Displacement | |
450 cm3 | 1200 cm3 |
Bore X Stroke | |
3.8x2.4 in OR 97 mm | 3.8x3.1 in OR 97 mm |
Compression Ratio | |
11.0:1 | 11:1 |
Horsepower | |
44/0 KW(hp)/RPM | 90/7000 KW(hp)/RPM |
Torque | |
- | 81/4250 lb-ft/RPM OR 110/4250 Nm/RPM |
Fuel System | |
Carburetor | Ride by wire, multipoint sequential electronic fuel injection |
transmission specs | |
Gearbox | |
---|---|
5-Speed Wide Ratio Transmission | 6-speed |
Clutch | |
- | Wet, multi-plate assist clutch |
Final Drive | |
Chain | X-ring chain |
chassis specs | |
Frame | |
---|---|
Twin Spar Aluminum Frame | Tubular steel, with steel cradles |
Front Suspension | |
WP XPlor 48mm sealed cartridge forks, spring preload/sag, high and low speed compression, rebound and damping adjustability | Marzocchi 45 mm 1+1 forks, fully adjustable 250 mm wheel travel |
Rear Suspension | |
Fast Ace shock with 24 click Compression adjustment, spring pre-load adjuster, 15 click externally adjustable rebound, and piggyback aluminum reservoir | Marzocchi twin RSUs with twin-springs and piggyback reservoir, fully adjustable 250 mm wheel travel |
Front Brake | |
Single Disc 240 mm | Twin 320 mm discs, Brembo Stylema 4-piston M4.30 radial monobloc caliper, OC-ABS |
Rear Brake | |
Single Disc 240 mm | Single 255 mm disc, single piston floating Nissin caliper, ABS |
dimension specs | |
Overall Length | |
---|---|
- | 91.7 in OR 2329 mm |
Overall Width | |
- | 35.6 in OR 904 mm |
Seat Height | |
35.8 in OR 909 mm | 34.3 in OR 871 mm |
Ground Clearance | |
13 in OR 330 mm | - |
Weight | |
278 lbs OR 126 kg | 507 lbs OR 230 kg |
Fuel Capacity | |
2.1 gallons OR 7.9 L | 4 gallons OR 15.1 L |
Wheelbase | |
59.1 in OR 1501 mm | 61.8 in OR 1570 mm |
tyres specs | |
Front | |
---|---|
80/100-21 | 90/90-21 |
Rear | |
110/100-18 | 150/70 R17 |